Fireplace Insert with Water Boiler Prity P W28 TV – 5 kW + 28.2 kW Water

The Fire for the Room. Serious Heat for a Larger Home.

The Prity P W28 TV steps up to a 28.2 kW water heat exchanger — enough to carry a larger central heating load across multiple radiators — while 5 kW of direct radiant heat still keeps the room it stands in comfortable. The flue outlet runs through the top of the unit, with the damper handle built directly into the collar for easy access once installed.

Made in Bulgaria. EU Ecodesign compliant.

How Much Space Can It Heat?

Prity doesn't publish an official heated-area figure for the P W28 TV, so this is our own estimate, based on the heated-area-to-power ratio observed across comparable Prity models in our range (roughly 7.5 m² per kW). Here, that ratio applies to the unit's combined output of 33.2 kW — 5 kW radiating into the room plus 28.2 kW into the water circuit, which spreads its heat through radiators installed around the house rather than from the insert itself. Combined, that puts the P W28 TV at approximately 250 m², depending on your home's insulation, radiator layout, and how the heating system is balanced.

A Compact, Upright Firebox

The combustion chamber measures 535 mm wide, 465 mm deep, and 380 mm high, set within an overall footprint of 775 × 600 × 870 mm (W × D × H). The ceramic glass door is kept clear by the secondary air wash system, which runs a continuous curtain of fresh air across the inner glass surface during burning. Connection ports on the side of the unit serve the water circuit.

A Larger Water Heat Exchanger for Bigger Homes

The P W28 TV delivers 28.2 kW to its water heat exchanger at nominal output, alongside 5 kW of direct radiant heat into the room. The water tank holds 36 litres, with a maximum working pressure of 1.25 bar and 1″ water connections for both flow and return.

This is a boiler-type appliance: it must be connected to a working central heating system before use, and should never be run dry or disconnected from your water circuit. Installation and commissioning by a qualified heating engineer is required.

Clean Combustion, Class A Efficiency

The P W28 TV achieves a combustion efficiency (η) of 78.6% and a seasonal space heating energy efficiency of 70%, with an energy efficiency index of 105 — placing it in energy class A. Emissions at nominal output: CO at 1208 mg/Nm³, particulate matter at 30 mg/Nm³, NOx at 96 mg/Nm³, and OGC at 21 mg/Nm³ — all within EU Ecodesign limits.

Fuel consumption at nominal output is 10.5 kg of dry wood per hour, reflecting the larger heat exchanger's demands. Flue gas temperature is 258°C, with a mass flow rate of 25.3 g/s.

Important Installation Note

The P W28 TV uses a Ø200 mm flue outlet, positioned on top of the unit, and requires a minimum chimney draught of 12.2 Pa. Please confirm your chimney connection is compatible with this diameter before ordering. At 155 kg, the unit needs a floor and framing capable of supporting the weight, and professional installation — including connection to your heating system — is required, not optional.

30 Years of European Engineering Behind Every Weld

Prity has manufactured solid fuel heating appliances in Gorna Oryahovitsa, Bulgaria, since 1995. With more than 250 production staff and a range refined across three decades, the company builds inserts that earn their place in a home for years. Every unit is manufactured to the relevant EN standards and independently verified.

Your P W28 TV comes with a 24-month manufacturer's warranty.

Everything You Get

• 5 kW of direct radiant heat, plus 28.2 kW to your water heat exchanger (33.2 kW combined)

• Top-mounted flue outlet with integrated damper control

• 36-litre water tank, 1.25 bar maximum working pressure, 1″ water connections

• Class A energy efficiency with a seasonal space heating energy efficiency of 70%

• Combustion efficiency (η) of 78.6%

• Firebox: 535 × 465 × 380 mm (W × D × H)

• Fuel consumption: 10.5 kg of dry wood per hour at nominal output

• Overall dimensions: 775 × 600 × 870 mm

• Flue outlet: Ø200 mm — confirm chimney compatibility before ordering

• Net weight: 155 kg

• 24-month manufacturer's warranty

Box Contents

Insert body with ceramic glass door and integrated water heat exchanger, technical manual.

Use only dry, chemically untreated natural wood with a moisture content not exceeding 20%. Do not burn household waste, painted wood, plywood, or treated wood. This appliance must be connected by a qualified installer to a working central heating system before use — never operate it disconnected from your water circuit. Always consult a qualified installer before connecting the appliance to your chimney system. Note: this model requires a Ø200 mm flue connection and 1″ water connections.