Prity WD D Wood-Burning Stove – 15.9 kW

Wide-Body Heating for Large Spaces. Built Low, Built Serious.

Not every room calls for a tall stove. Long open halls, converted barns, large kitchen-diners with low beams, or simply spaces where width rather than height works better architecturally — the Prity WD D was designed for these situations. Wide-bodied and low-slung at just 780 mm tall, it delivers 15.9 kW of radiant heat from one of the widest fireboxes in the Prity range, while sitting comfortably beneath worktops, beams, or built-in shelving that a taller stove couldn't clear.

Suitable for spaces of up to approximately 122 m² depending on insulation, ceiling height, and room layout, the WD D is a primary heating appliance for large rooms — not a supplementary heater dressed up as one.

How Much Space Can It Heat?

The WD D delivers 15.9 kW, suitable for heating spaces of up to approximately 122 m² in well-insulated properties. It performs best as the primary heat source for large living rooms, open-plan areas, farmhouses, or any space where consistent high-output heating over long winter days is the priority.

A Wide Firebox That Accepts Long Logs Without Splitting

At 570 mm wide internally, the WD D's firebox matches the width of Prity's largest model — meaning full-length unsplit logs can be loaded directly, reducing the preparation time and effort of keeping a large stove fed. The wide landscape-format ceramic glass door gives a broad, unobstructed view of the fire from across the room.

Louvered convection vents at the top of the body distribute warm air from the firebox casing upward into the room, while the open log storage niche at the base keeps a session's supply of firewood clean, dry, and immediately to hand. At 5.1 kg/h fuel consumption, this stove runs hard — but the very low flue temperature of 210°C indicates that heat is being extracted from the combustion gases effectively rather than escaping up the chimney.

EU Ecodesign Compliant. Certified to EN 13240.

The Prity WD D carries an Energy Efficiency Class A rating and meets the EU Ecodesign Regulation 2015/1185 requirements — certified for sale and installation across all primary EU markets. Its emissions performance is notably clean for a high-output stove: CO at 914 mg/Nm³ and PM at just 29 mg/Nm³ are well within European permitted limits.

30 Years of European Engineering Behind Every Weld

Prity has been manufacturing wood-burning stoves and fireplaces in Gorna Oryahovitsa, Bulgaria since 1995. Every stove is manufactured to EN 13240, the European standard for solid fuel room heaters, and carries TÜV NORD certification — independent quality verification from one of Europe's most respected technical inspection authorities.

Your WD D comes with a 24-month manufacturer's warranty.

Everything You Get

• 15.9 kW heat output — suitable for spaces up to approximately 122 m², depending on insulation and ceiling height

• Energy Efficiency Class A — EU Ecodesign compliant across all primary EU markets

• Wide-body, low-profile design (650 × 550 × 780 mm) — fits beneath beams, shelving, and low ceilings

• Enormous firebox (570 × 450 × 290 mm) — 570 mm wide, accommodates long unsplit logs

• Wide landscape-format ceramic glass door — broad view of the fire

• Louvered convection vents for even heat distribution

• Open log storage niche at base — keeps firewood close and tidy

• Very low flue temperature (210°C) — efficient heat extraction

• Standard Ø150 mm flue outlet, top exit

• 114 kg — exceptionally solid, stable construction

• TÜV NORD certified to EN 13240

• 24-month warranty

What's in the Box

Stove body with ceramic glass door, ash drawer, handle set with air control, technical manual.

Use only dry, chemically untreated natural wood or wood briquettes without adhesives. Wood moisture content must not exceed 20%. Do not burn household waste, painted wood, plywood, or impregnated timber. Always consult a qualified installer before connecting to your chimney system.