Prity K1 Wood Burning Stove – 9.5 kW

A Wider Firebox for Longer Logs.

The Prity K1 is a single-control wood stove delivering 9.5 kW from a wide, low-profile firebox — 370 mm across, noticeably wider than most stoves in this power class. That extra width means longer logs load without cutting them down, and a built-in open storage shelf at the base keeps a supply close at hand without a separate log basket taking up floor space.

Class A energy efficiency. Simple primary air control. Over 30 years of Bulgarian engineering behind it.

How Much Space Can It Heat?

The K1 is suitable for heating spaces of up to approximately 70 m², depending on insulation, ceiling height, and room layout. It works well as the primary heat source for living rooms, cabins, and workshops, or as a supplementary heat source in larger homes.

Simple, Direct Air Control

Unlike the multi-stage combustion systems used on larger Prity models, the K1 is built around a single primary air control. Open it to light the fire and build a strong flame quickly; close it down once combustion is established to slow the burn and extend your fuel. It's a straightforward system with fewer moving parts — easy to operate, easy to maintain.

The result: 77.8% efficiency from a single-control design.

Wide Firebox. Built-In Log Storage.

At 370 × 337 mm, the K1's firebox is wider than most stoves at this output level, giving you room to load longer logs without cutting them to size. Below the ash and air control door, an open shelf spans the base of the stove — a practical spot to keep your next few logs drying and within reach.

Class A. EU Certified. Ready for European Winters.

The K1 carries an Energy Efficiency Class A rating, with an Energy Efficiency Index of 104. It meets the full requirements of EU Ecodesign Regulation 2015/1185, making it fully compliant for installation and use across all EU member states.

Its 69% seasonal heating efficiency reflects real-world performance across an entire heating season — not just peak laboratory conditions.

30 Years of European Engineering Behind Every Weld

Prity has been manufacturing solid fuel heating appliances in Gorna Oryahovitsa, Bulgaria since 1995. Every Prity stove is manufactured to BDS EN 13240, the European standard for solid fuel room heaters, and independently verified by TÜV NORD — one of Europe's most respected technical certification authorities.

Your K1 comes with a 24-month manufacturer's warranty.

Everything You Get

• 9.5 kW heat output — suitable for spaces up to approximately 70 m², depending on insulation, ceiling height, and room layout

• Energy Efficiency Class A with 69% seasonal heating efficiency (EEI 104)

• Single primary air control — simple, direct operation

• Wide firebox (370 × 337 × 320 mm) — admits longer logs

• Built-in open log storage shelf at the base

• Heat-resistant ceramic glass door — clear view of the fire

• Footprint: 450 × 380 mm floor space required

• Fuel consumption: 2.9 kg of wood per hour at rated output

• Minimum chimney draught: 11 Pa

• Flue outlet diameter: Ø130 mm

• Net weight: 58 kg

• Full EU Ecodesign compliance — legal to install and operate across the EU

• TÜV NORD certified

• 24-month warranty

What's in the Box

Stove body with base storage shelf, door with heat-resistant ceramic glass, ash drawer, handle set with latch, technical manual.

Use only dry, chemically untreated natural wood or wood briquettes without adhesives. Wood moisture content must not exceed 20%. Do not burn household waste, painted wood, plywood, or impregnated timber. Always consult a qualified installer before connecting to your chimney system.