Fireplace Insert Prity P TV – 13.1 kW

A Top-Mounted Flue Outlet for Easier Access

The Prity P TV routes its flue outlet through the top of the unit, with the damper handle built directly into the collar for easy access once installed. With 13.1 kW of radiant heat and energy class A, it delivers the same solid performance as the rest of the range in a compact, upright build.

Made in Bulgaria. EU Ecodesign compliant.

How Much Space Can It Heat?

Prity doesn't publish an official heated-area figure for the P TV, so this is our own estimate, based on the heated-area-to-power ratio observed across comparable Prity models in our range (roughly 7.5 m² per kW). At 13.1 kW, that puts the P TV at approximately 95–100 m², depending on insulation, ceiling height, and room layout.

A Compact, Upright Build

The combustion chamber measures 607 mm wide, 360 mm deep, and 377 mm high, set within an overall footprint of 780 × 470 × 770 mm (W × D × H) — a narrower, taller build than the standard P, suited to openings where height is more available than width. The ceramic glass door is kept clear by the secondary air wash system, which runs a continuous curtain of fresh air across the inner glass surface during burning.

Clean Combustion, Class A Efficiency

The P TV achieves a combustion efficiency (η) of 78.3% and a seasonal space heating energy efficiency of 69%, with an energy efficiency index of 105 — placing it in energy class A. Emissions at nominal output are notably clean: CO at just 906 mg/Nm³, particulate matter at 27 mg/Nm³, NOx at 89 mg/Nm³, and OGC at 21 mg/Nm³ — all comfortably within EU Ecodesign limits.

Fuel consumption at nominal output is 4.2 kg of dry wood per hour, with a flue gas temperature of 200°C and a mass flow rate of 13.2 g/s.

Important Installation Note

The P TV uses a Ø200 mm flue outlet, positioned on top of the unit, and requires a minimum chimney draught of 12.2 Pa. Please confirm your chimney connection is compatible with this diameter before ordering. At 110 kg, the unit needs a floor and framing capable of supporting the weight.

30 Years of European Engineering Behind Every Weld

Prity has manufactured solid fuel heating appliances in Gorna Oryahovitsa, Bulgaria, since 1995. With more than 250 production staff and a range refined across three decades, the company builds inserts that earn their place in a home for years. Every unit is manufactured to the relevant EN standards and independently verified.

Your P TV comes with a 24-month manufacturer's warranty.

Everything You Get

• 13.1 kW of radiant heat — suitable for spaces up to approximately 100 m², depending on insulation, ceiling height, and room layout

• Top-mounted flue outlet with integrated damper control

• Class A energy efficiency with a seasonal space heating energy efficiency of 69%

• Combustion efficiency (η) of 78.3%

• Notably low CO emissions: just 906 mg/Nm³

• Firebox: 607 × 360 × 377 mm (W × D × H)

• Fuel consumption: 4.2 kg of dry wood per hour at nominal output

• Overall dimensions: 780 × 470 × 770 mm

• Flue outlet: Ø200 mm — confirm chimney compatibility before ordering

• Net weight: 110 kg

• 24-month manufacturer's warranty

Box Contents

Insert body with ceramic glass door, technical manual.

Use only dry, chemically untreated natural wood with a moisture content not exceeding 20%. Do not burn household waste, painted wood, plywood, or treated wood. Always consult a qualified installer before connecting the appliance to your chimney system. Note: this model requires a Ø200 mm connection.