Prity GT D Wood Burning Cooking Stove – 10.9 kW

The GT Look. Now With a Full Kitchen Built In.

The Prity GT D carries the same clean-lined, chrome-trimmed design language as the K2 GT and K3 GT D — but where those stoves heat a room, the GT D heats your kitchen and cooks your meals from the same fire. A full cooking plate and one of the largest ovens in the entire Prity range sit behind a familiar GT silhouette, available in the same three finishes: ivory, burgundy, and black.

With 10.9 kW of radiant heat output and an 82.0% efficiency rating, the GT D heats the room it's installed in while its oven — a generous 415 × 488 × 271 mm — handles a full roast, a batch of loaves, or a slow-cooked stew. Energy Class A+, with an EEI of 109.

How Much Space Can It Heat?

The GT D is suitable for heating spaces of up to 80 m², depending on insulation, ceiling height, and room layout. It works well as a primary heat source for a kitchen and adjoining living space, or as a strong supplementary heat source in larger homes.

One of the Largest Ovens in the Prity Range

At 415 × 488 × 271 mm, the oven on the GT D is noticeably larger than most cooking stoves in the Prity lineup — enough room for a full roasting tin, several loaves side by side, or a large casserole dish. It's heated directly by the fire below, so there's no electricity required and no preheating delay once the stove is up to temperature.

The firebox itself is compact but deep — 225 × 450 × 269 mm — designed to take full-length logs without splitting while keeping the stove's overall footprint tight. It's lined with firebrick that absorbs and stores heat during combustion, releasing it steadily long after the flames die down.

Clean, Efficient Combustion

The GT D returns a flue gas temperature of just 150°C and a seasonal space heating energy efficiency (ηs) of 72.0% — both signs that the stove is extracting real heat from the fire rather than sending it up the chimney. Emissions at nominal output are CO 971.0 mg/Nm³, dust 34.1 mg/Nm³, NOx 101.7 mg/Nm³, and OGC 100.5 mg/Nm³, all measured at 13% O2.

Fuel consumption runs at 3.3 kg/h at nominal power, with a minimum chimney draught requirement of just 12 Pa — modest enough to suit most existing chimney systems.

Three Ways to Make It Yours

The GT D can be configured to match your kitchen rather than compromise with it:

• Body colour — ivory, burgundy, or classic black
• Cooking plate — steel or ceramic
• Oven — standard steel or stainless steel, for easier cleaning and a sleeker finish

30 Years of European Engineering Behind Every Weld

Prity has been manufacturing solid fuel heating appliances in Gorna Oryahovitsa, Bulgaria since 1995. With over 250 production workers and a product range refined over three decades, they build stoves that earn their place in a kitchen for many years. Every unit is manufactured to EN 13240, the European standard for domestic solid fuel heating appliances.

Your GT D comes with a 24-month manufacturer's warranty.

Everything You Get

• Radiant heat output of 10.9 kW — suitable for spaces up to 80 m², depending on insulation, ceiling height, and room layout

• Energy Class A+ with an EEI of 109 and a seasonal heating efficiency of 72.0%

• 82.0% efficiency — a genuinely high figure for a wood-fired cooking stove

• Large oven (415 × 488 × 271 mm) — one of the roomiest in the Prity range

• Compact, deep firebox (225 × 450 × 269 mm) lined with firebrick for extended heat retention

• Low chimney draught requirement of just 12 Pa

• Fuel consumption of 3.3 kg/h at nominal power

• Overall dimensions: 930 × 565 × 846 mm

• Net weight: 130 kg

• Standard Ø150 mm flue outlet

• Available in ivory, burgundy, or black

• Choice of steel or ceramic cooking plate, and steel or stainless steel oven

• 24-month warranty

What's in the Box

Stove body with integrated oven and cooking plate (configuration per order), ash drawer, handle set with air control, technical manual.

Use only dry, chemically untreated natural wood or wood briquettes without adhesives. Wood moisture content must not exceed 20%. Do not burn household waste, painted wood, plywood, or impregnated timber. Always consult a qualified installer before connecting to your chimney system. Note: this model weighs 130 kg — professional installation is recommended.