Prity MR D Wood Burning Stove – 11.6 kW

Classic Lines, Raised on Legs, Built for Real Heat

The Prity MR D pairs a flat, useful top plate with a wide window door and slender, angled legs — a straightforward, classic silhouette that suits both traditional and modern rooms. 11.6 kW of radiant heat and an A+ energy efficiency rating back up the look with real performance.

Made in Bulgaria. EU Ecodesign compliant.

How Much Area Can It Heat?

Prity doesn't publish an official heated-area figure for the MR D, so this is our own estimate, based on the heated-area-to-power ratio observed across comparable Prity models in our range (roughly 7.5 m² per kW). At 11.6 kW, that puts the MR D at approximately 85 m², depending on insulation, ceiling height, and room layout.

A Wide Window, a Practical Top Plate

The door's glass window spans most of its width, giving a broad view of the fire, with a rotary air control set into the door below it. The flat top plate runs the full width and depth of the stove body, with the flue collar and damper control positioned near the rear.

Clean Combustion, A+ Efficiency

The MR D achieves a combustion efficiency (η) of 81.9% and a seasonal space heating energy efficiency of 71.9%, with an energy efficiency index of 109 — placing it in energy class A+. Emissions at nominal output: CO at 875 mg/Nm³, particulate matter at 27.3 mg/Nm³, NOx at 99 mg/Nm³, and OGC at 81 mg/Nm³ — all within EU Ecodesign limits.

Fuel consumption at nominal output is 3.5 kg of dry wood per hour, with a flue gas temperature of 263°C and a mass flow rate of 9.4 g/s.

Firebox

The combustion chamber measures 600 mm wide, 338 mm deep, and 290 mm high. The ceramic glass door is kept clear by the secondary air wash system, which runs a continuous curtain of fresh air across the inner glass surface during burning.

Important Installation Note

The MR D uses a Ø150 mm flue outlet and requires a minimum chimney draught of 12 Pa. Please confirm your chimney connection is compatible with this diameter before ordering. At 97 kg, the unit needs a floor capable of supporting the weight. Body height is 813 mm, with the flue collar bringing total height to approximately 917 mm; overall footprint is 680 × 470 mm (W × D).

30 Years of European Engineering Behind Every Weld

Prity has manufactured solid fuel heating appliances in Gorna Oryahovitsa, Bulgaria, since 1995. With more than 250 production staff and a range refined across three decades, the company builds stoves that earn their place in a home for years. Every unit is manufactured to the relevant EN standards and independently verified.

Your MR D comes with a 24-month manufacturer's warranty.

What You Get

• 11.6 kW heat output — suitable for heating up to approximately 85 m², depending on insulation, ceiling height and room layout

• A+ energy efficiency class, with a seasonal space heating efficiency of 71.9%

• 81.9% combustion efficiency (η)

• Triple air-supply combustion system: primary, secondary and tertiary air control

• Wide glass door with rotary air control

• Flat top plate

• Firebox: 600 × 338 × 290 mm (W × D × H)

• Fuel consumption: 3.5 kg of dry wood per hour at nominal output

• Overall footprint: 680 × 470 mm; body height 813 mm

• Flue outlet: Ø150 mm — confirm chimney compatibility before ordering

• Net weight: 97 kg

• 24-month warranty

What's In the Box

Stove body with ceramic glass door, handle set with rotary air control, technical manual.

Use only dry, chemically untreated natural wood or glue-free wood briquettes. Moisture content of the wood must not exceed 20%. Do not burn household waste, painted wood, plywood, or treated timber. Always consult a qualified installer before connecting to your chimney system.