Prity KR D Wood-Burning Stove – 9.3 kW

The Same Serious Heat. A Style That Stands Out.

There are stoves that heat a room. And then there are stoves that define it. The Prity KR D does both — delivering the same 9.3 kW of powerful, efficient heat as its sibling the KD, wrapped in a classic raised design that brings a touch of character to any interior.

The "R" stands for Retro. The elevated stance, lifted on four legs, gives this stove a timeless presence — at home in a rustic farmhouse, a Scandinavian-inspired living room, or a modern apartment that needs a focal point with soul.

Class A+ energy efficiency. TÜV NORD certified. Built in Bulgaria by engineers who have been doing this since 1995.

How Much Space Can It Heat?

The KR D is suitable for heating spaces of up to 70 m², depending on insulation, ceiling height, and room layout. It performs equally well as the primary heat source for a generous living room or open-plan space, and as a powerful supplementary heater in larger homes.

Triple Combustion Technology: More Heat from Every Log

The KR D uses Prity's triple air combustion system — a meaningful engineering advantage over basic single-damper stoves.

Primary air gets the fire going fast and draws the chimney to life. Once combustion is stable, you close it down and let the stove settle into its efficient running mode. Secondary air then sustains the burn through the upper edge of the combustion chamber door, simultaneously washing the heat-resistant ceramic glass to keep it clear — so the fire remains visible and inviting throughout. Tertiary air completes the process, fully mixing the combustion gases to squeeze maximum energy from every log you load.

The firebox is lined with heat-retaining firebricks that absorb intense heat during the burn and release it steadily back into the room long after the flames have settled. One good load of wood delivers hours of comfortable warmth.

The result: 81.3% efficiency. The energy in your firewood goes into your home, not up the chimney.

A+ Rated. EU Certified. Ready for European Winters.

The KR D carries an Energy Efficiency Class A+ rating and meets the full requirements of EU Ecodesign Regulation 2015/1185, making it compliant for installation and use across all EU member states. Its 71.3% seasonal heating efficiency reflects consistent real-world performance across an entire heating season — not just peak laboratory output.

30 Years of European Engineering Behind Every Weld

Prity has been manufacturing solid fuel heating appliances in Gorna Oryahovitsa, Bulgaria since 1995. With over 250 production workers and a range refined over three decades, they build stoves that earn their place in a home for many years. Every unit is manufactured to BDS EN 13240 and independently verified by TÜV NORD — the KR D's 81.3% efficiency is a tested, certified result, not a marketing figure.

Your KR D comes with a 24-month manufacturer's warranty.

Everything You Get

• 9.3 kW heat output — suitable for spaces up to 70 m², depending on insulation, ceiling height, and room layout

• Retro raised design on legs — a distinctive focal point for any interior

• Energy Efficiency Class A+ with 71.3% seasonal heating efficiency

• Triple air combustion system: primary, secondary, and tertiary air controls

• Firebrick-lined combustion chamber for extended heat retention

• Heat-resistant ceramic glass door — clear view of the fire during prolonged use

• Cast iron grate — built for daily use over many years

• Compact footprint: only 450 × 380 mm floor space required

• Fuel consumption: 2.9 kg of wood per hour at rated output

• Full EU Ecodesign compliance — legal to install and operate across the EU

• TÜV NORD certified

• 24-month warranty

What's in the Box

Fireplace body, door with heat-resistant ceramic glass, ash drawer, cast iron grate, handle set with latch and air regulator, technical manual.

Use only dry, chemically untreated natural wood or wood briquettes without adhesives. Wood moisture content must not exceed 20%. Do not burn household waste, painted wood, plywood, or impregnated timber. Always consult a qualified installer before connecting to your chimney system.